| Cementitious floor hardeners&toppings | |||||
Natural aggregate based dry shake floor hardener on fresh concrete. Monolithic system increases the abrasion and impact resistance of the floor concrete |
Medium duty: 3 to 5 kg per m2 Heavy duty : 5 to 7 kg per m2
|
 |
|||
Dry shake monolithic floor hardener to provide high hard wearing surface on concrete floors. It forms monolithic bond with fresh concrete and minimizes the problems such as curling, shrinkage, cracking etc. |
Medium duty: 3 to 5 kg per m2 Heavy duty : 5 to 7 kg per m2 |
|
|||
An integral hardening admixture used to increase abrasion and erosion resistance of concrete. |
- |
|
|||
Cementitious Self-Levelling Floor-Top and Underlayment System |
2kg for 1m2 with 1mm thickness. |
|
|||
Self-Levelling Polyurethane-Cement Based Floor System |
20 kg bags |
|
|||
Cement based binder for seamless terrazzo |
20 kg & 25 kg bags |
|
|||
|
|
||||
Sodium silicate based floor hardener and dust proofer |
5 – 12 m2 per liter |
|
|||
|
|
||||
| CIKOpoxy Prim WB | Two component waterborne epoxy based primer | 10 m2 per liter@100 microns DFT | |
||
| CIKOPoxy Prim 25 | A solvent based two component epoxy primer recommended for concrete and masonry substrates. | 4.5-5.5 m2 per liter@100 microns DFT | |
||
Solvented epoxy resin based low viscosity primer, which stabilizes the concrete substrate and isolates subsequent coatings from the alkalinity of the concrete |
7.0 m2 per liter@100 microns DFT
|
|
|||
Solvent free epoxy resin based low viscosity primer, which stabilizes the concrete substrate and isolates subsequent coatings from the alkalinity of the concrete |
5.0 m2 per liter@200 microns DFT |
|
|||
Solvent Free, Medium Viscosity Epoxy Based Primer |
26 kg kit covers 65-68 m2/ltr @ 250 microns DFT |
|
|||
Solvent free pure epoxy resin floor coating |
24 kg kit will provide a theoretical coverage between 77 and 80 m2 at 200 microns DFT. |
|
|||
Solvent free epoxy resin based heavy‐duty floor coating. Used on industrial and commercial floors as chemical and abrasion resistant floor coating |
5 m2 per liter@200 microns DFT |
|
|||
Solvent free, epoxy resin based heavy duty wall coating |
6.6 m2 per liter@150 microns DFT |
|
|||
two component water based epoxy coating recommended for concrete and masonry substrate where there is risk of rising humidity. |
5.0 m2 7 to 8 m²/L at 100μ DFT |
|
|||
Epoxy based self leveling floor topping system applied at a minimum thickness of 0.8mm and maximum up to 1.5mm. Used on industrial and commercial floors to obtain hygienic floors |
12-13 m2 per pack of 20 kg@1mm thickness |
|
|||
Epoxy resin based self leveling floor top system for 4mm to 6mm thickness |
4.0 m2 per pack of 25 kg@4mm DFT |
|
|||
Solvent free epoxy resin floor coating |
between 73 and 75 m2 at 200 microns DFT. |
|
|||
Three component epoxy resin based floor screed for chemical resistant, heavy‐duty production area or warehouse. Withstands dynamic and static heavy loads |
2.5 m2 per pack of 25 kg@5mm DFT |
|
|||
Epoxy resin based heavy duty floor screed & resurfacing material |
5.0 m2 per pack of 20 kg@2mm DFT |
|
|||
Epoxy resin based, solvent free self leveling topping and bedding system. Provides a smooth, seamless finish to a thickness of 2 – 6mm |
2.5 m2 per pack of 7.5 liter@3mm DFT |
|
|||
Crystal Clear Epoxy Resin for Table Topssthetic finish. |
1 m2 per 1 litre at 1 mm DFT. |
|
|||
Heavy Duty Polyurethane-Cement Based Easy-Trowel Grade Floor Screed |
2-2.15 m² @ 6 mm DFT. |
|
|||
Epoxy resin based terrazzo flooring system for decorative floor finish. Provides heavy duty seamless floor with excellent aesthetic finish. |
11.5 kg per m2@6mm thickness DFT. |
|
|||
|
|
||||
Polyurethane Primer and Sealer |
6.0 m2 per litre at 100 microns thickness. |
|
|||
| CIKOpoly TC | Solvent free two component aromatic polyurethane based floor coating system recommended for extreme ambient temperature conditions. It provides excellent adhesion to substrate such as concrete, wood, steel and other substrates. CIKOpoly TC is flexible, yet tough and designed to provide an elastomeric, durable floor coating system. |
2.0m2 per litre at 500micron dry film thickness |
|
||
| CIKOsport SL70 | Solvent free Polyurethane self-levelling flexible membrane |
20 kg kit CIKOsport SL70 yields 14.5 to 15.1 L of material providing a theoretical coverage of 7.25 up to 7.55 m2 at 2mm dry film thickness. |
|
||
| CIKOpoly SL1000 | A solvent-free polyurethane self-levelling two component floor system.CIKOpoly SL1000 is based on liquid polyurethane cured with a special grade of hardener. It offers seamless floor having a thickness of 0.5 to 2 mm. It provides a smooth, hygienic floor with excellent chemical resistance. |
14m2 per 20kg kit at 1mm dry film thickness. |
|
||
A solvent-free polyurethane self-levelling three component floor system.it is based on liquid polyurethane cured with a special grade of hardener. It offers seamless floor having a thickness of 2 to 4 mm. It provides a smooth, hygienic floor with excellent chemical resistance. |
Depending on the application |
|
|||
A solvent free, low VOC, filler free, two component polyurethane floor binder for indoor and outdoor application used in conjunction with special aggregate, stones and filler to form a stone carpet floor finish. |
- |
|
|||
|
|
||||
Powdered release agent for stamped concrete |
5.0-7.0 m2/Kg. |
|
|||
High solids acrylic floor and wall sealer and curing compound |
8.0-10.0 m2/ltr. |
|
|||
Dry shake concrete floor Hardener for stamped concrete |
3.0-5.0kg/m2 |
|
|||
|
|
||||
A multi-layered car park decking system providing different solutions for different parking areas. |
|
|
|||
Iimpressive range of high-quality polyurethane sports flooring systems providing you a diversity of sports system that suits all your needs in the field of sports, budget and activities. |
|
|
|||
