|
|
TDS-Download |
|
Acrylic modified cement based waterproof coating recommended for horizontal and vertical applications on concrete, mortar and clay / cement block masonry surface. |
1mm Thickness: 11.5 to 12 m2 |
 |
|
Two‐component flexible cementitious waterproof coating for horizontal and vertical application on concrete, plaster, masonry walls and water retaining structures |
30kg bag of CIKOproof 2K yield to 16-17 liters and provide coverage of 16-17 /m2 at 1mm thickness |
|
|
Two‐component Drinking Water Certified Elastomeric cementitious waterproof coating for horizontal and vertical application on concrete, plaster, masonry walls and water retaining structures CIKOproof 2K Extra has been certified by the AWQC institute (Australian Water Quality Centre) for waterproofing of drinking water tanks, in accordance BS 6920:2014. |
27kg bag of CIKOproof 2K extra yield to 18 liters and provide coverage of 17-18 /m2 at 1mm thickness
|
|
|
High Build Acrylic Waterproof membrane coating |
2 kg / m2 @ 1 mm dry film thickness |
|
|
Fast setting hydraulic cement based plugging material. Used to plug running water in basement or water tank to stop loss of water immediately and to fix permanent waterproof systems. Sets in less than a minute. |
Each 10kg pack yield 5.0 liters
|
|
|
|
|
||
Two Component High Quality Pure Polyurea waterproof and protective coating |
1L of CIKOproof PPUA will theoretically cover 1 m2 at 1 mm DFT |
|
|
liquid-applied, permanent elastic, cold applied and cold curing, bitumen extended, one component polyurethane membrane used for long-lasting waterproofing. |
15 kg per m2 @ 1mm DFT in two coats |
|
|
Polyurethane- Acrylic based liquid applied waterproofing membrane |
1 kg per m2 @ 350 microns DFT |
|
|
liquid-applied, highly permanent elastic, cold applied and cold curing, one component polyurethane membrane used for long-lasting waterproofing. |
1.4 kg per m2 @ 1mm DFT in two coats |
|
|
Two components solvent free, liquid applied Polyurethane base water proofing coating for horizontal and vertical applications on concrete, mortar and cement block masonry surfaces. The cured material provides excellent elastomeric properties and can be used on a wide range of porous and non-porous substrates. |
1.0 liter per m2 @ 1mm DFT in minimum two coats |
|
|
Solvent free, multipurpose elastomeric two component liquid applied membrane based on polyurethane resin. When cures, it creates an impermeable membrane with excellent characteristics: elasticity, coupled with high tensile strength, as well as puncture, abrasion and chemical resistance. it is also used as intermediate layer for car parking flooring and deck system. |
1 liter per m2 @ 1mm WFT in two coats |
|
|
|
|
||
A surface applied crystalline slurry treatment that transforms new or existing concrete into a permanent waterproof barrier |
APPROXIMATE COVERAGE PER 25 KG (55 LB) PAIL2 |
|
|
Single component capillary waterproofing system performs by crystallization process that can waterproof new or old sound cement based substrates. It is modified cement based waterproof coating for horizontal and vertical applications on concrete; mortar and cement block masonry surfaces. |
1.5 kg per m2 |
|
|
|
|
||
Rubberised bitumen emulsion for use as protective coating for horizontal and vertical applications on concrete; mortar and cement block masonry surfaces. It provides excellent resistance to soil chemicals. |
3.0 m2 per liter per coat. Minimum two coats |
|
|
A rubberised bitumen emulsion used as a cationic slow setting asphalt emulsion (CSS-1) which serves as a seal coat over Cement Bound Granular Mixtures in road constructions. |
3.0 m2 per liter per coat. Minimum two coats |
|
|
Rubberised bitumen emulsion for use as protective coating for horizontal and vertical applications on concrete, mortar and cement block masonry surfaces. It provides excellent resistance to soil chemicals. |
3.0 m2 per liter per coat. Minimum two coats |
|
|
Rubberised bitumen emulsion for use as protective coating for horizontal and vertical applications on concrete, mortar and cement block masonry surfaces. It provides excellent resistance to soil chemicals. |
3.0 m2 per liter per coat. Minimum two coats |
|
|
| CIKOSeal FB | Fiber reinforced bitumen emulsion for build‐up waterproofing system. Complies with ASTM D1227 for build‐up waterproofing membranes | 3.0 m2 per liter per coat. Minimum two coats | |
| CIKOPrimer WB | Water based emulsified bituminous protective coating for horizontal and vertical applications on concrete, mortar, cement block masonry and non-rusting metallic surfaces. | 5.0 – 8.0 m2 per liter | |
| CIKOprime SB | Solvent based bituminous primer/coating | 5.0 - 6.0 m2 per liter | |
| CIKOPrimer SB | Solvent based bitumen primer. Complies with ASTM D41. Used as a primer for torch applied waterproofing membranes and for solvent based bitumen topcoats | 5.0 - 6.0 m2 per liter | |
Plastomeric bituminous waterproofing membrane obtained from distilled asphalt modified with thermoplastic resins (APP, IPP). The membrane is reinforced by a non-woven polyester .Both surfaces of the membrane are protected by a plastic film easily torched. |
1meter by 10 meters roll. |
|
|
Plastomeric bituminous waterproofing membrane obtained from distilled asphalt modified with thermoplastic resins (APP, IPP). The membrane is reinforced by a non-woven polyester .The upper surface of the membrane is protected by white/grey slate flakes and the lower surface by a plastic film easily torched. |
1meter by 10 meters roll. |
|
|
| CIKOseal SBS Membrane | Elastomeric bituminous waterproofing membrane obtained from distilled asphalt modified with elastomeric resins (SBS). The membrane is reinforced by non-woven polyester. Both surfaces of the membrane are covered by a plastic film easily torched. | 1meter by 10 meters roll. | |
| CIKOstick ALU Membrane | Elastomeric self-adhesive bituminous waterproofing membrane. The membrane is reinforced by a glass fiber tissue. The upper surface is covered by an aluminum foil and the lower surface by a siliconized film which has to be removed during the application. | 1meter by 20 meters roll. | |
| CIKOstick Membrane | Elastomeric self-adhesive bituminous waterproofing membrane obtained from distilled asphalt modified with elastomeric resins SBS and special additives. The membrane is reinforced by polyester felt. The upper surface is covered by a PP film and the lower surface by a siliconized film which has to be removed during the application. | 1meter by 20 meters roll. | |
| CIKOstick Membrane1 | An elastomeric self-adhesive bituminous waterproofing membrane obtained from distilled asphalt modified with elastomeric resins SBS and special additives. The membrane is reinforced by fiberglass felt. The upper surface is covered by a HDPE film and the lower surface by a siliconized film which has to be removed during the application. | 1meter by 20 meters roll. | |
| CIKOBoard HDB | Protection Board is used to protect the waterproofing insulation from construction abuse and harmful puncture by rock and stones during backfill operation. For horizantal surfaces, it gives protection against normal foot traffic as well as the wearing caused by built-up layers. | Board Size 1mt x 2mt. | |
| Ancillaries | |||
| CIKOhydro Seal | Centrally and Externally flexible PVC Waterstops | 15 and 20 meters per roll | |
SEALING PLUG consists of an impact proof and pressure resistant core and a water swellable soft sealing. |
22\24\26\32 or 34mm per plug |
|
|
Hydrophilic water stop based on synthetic rubber that acts as a watertight sealing for construction joints with excellent swelling capabilities. |
10 meters/roll |
|
|
Hydrophilic water stop based on synthetic rubber that acts as a watertight sealing for construction joints with excellent swelling capabilities. |
10 meters/roll |
|
|
Hydrophilic water stop based on synthetic rubber that acts as a watertight sealing for construction joints with excellent swelling capabilities. |
10 meters/roll |
|
|
Hydrophilic water stop based on synthetic rubber that acts as a watertight sealing for construction joints with excellent swelling capabilities. SW is developed for sealing in contact with high concentrates of salt (sea water – manure and slurry). |
10 meters/roll |
|
|
Hydrophilic water stop based on synthetic rubber that acts as a watertight sealing for construction joints with excellent swelling capabilities. SW is developed for sealing in contact with high concentrates of salt (sea water – manure and slurry). |
10 meters/roll |
|
|
