Bitumen Based Waterproofing Materials

Showing 1–12 of 15 results

CIKOBoard HDB
(0 Customer review)
$0.00
Protection Board is used to protect the waterproofing insulation from construction abuse and harmful puncture by rock and stones during backfill operation. For horizantal surfaces, it gives protection against normal foot traffic as well as the wearing caused by built-up layers. Board Size 1mt x 2mt.
CIKOprime SB
(0 Customer review)
$0.00
Solvent based bituminous primer/coating 5.0 - 6.0 m2 per liter
CIKOPrimer SB
(0 Customer review)
$0.00
Solvent based bitumen primer. Complies with ASTM D41. Used as a primer for torch applied waterproofing membranes and for solvent based bitumen topcoats 5.0 - 6.0 m2 per liter
CIKOPrimer WB
(0 Customer review)
$0.00
Water based emulsified bituminous protective coating for horizontal and vertical applications on concrete, mortar, cement block masonry and non-rusting metallic surfaces. 5.0 – 8.0 m2 per liter
CIKOseal APP Membrane
(0 Customer review)
$0.00
Plastomeric bituminous waterproofing membrane obtained from distilled asphalt modified with thermoplastic resins (APP, IPP). The membrane is reinforced by a non-woven polyester .Both surfaces of the membrane are protected by a plastic film easily torched. 1meter by 10 meters roll.
CIKOseal APP SF Membrane
(0 Customer review)
$0.00
Plastomeric bituminous waterproofing membrane obtained from distilled asphalt modified with thermoplastic resins (APP, IPP). The membrane is reinforced by a non-woven polyester .The upper surface of the membrane is protected by white/grey slate flakes and the lower surface by a plastic film easily torched. 1meter by 10 meters roll.
CIKOSeal FB
(0 Customer review)
$0.00
Fiber reinforced bitumen emulsion for build‐up waterproofing system. Complies with ASTM D1227 for build‐up waterproofing membranes 3.0 m2 per liter per coat. Minimum two coats
CIKOSeal RB
(0 Customer review)
$0.00
Rubberised bitumen emulsion for use as protective coating for horizontal and vertical applications on concrete; mortar and cement block masonry surfaces. It provides excellent resistance to soil chemicals. 3.0 m2 per liter per coat. Minimum two coats
CIKOSeal RB-N
(0 Customer review)
$0.00
Rubberised bitumen emulsion for use as protective coating for horizontal and vertical applications on concrete, mortar and cement block masonry surfaces. It provides excellent resistance to soil chemicals. 3.0 m2 per liter per coat. Minimum two coats
CIKOSeal RB+
(0 Customer review)
$0.00
A rubberised bitumen emulsion used as a cationic slow setting asphalt emulsion (CSS-1) which serves as a seal coat over Cement Bound Granular Mixtures in road constructions. CIKOSeal RB+ also serves as 3.0 m2 per liter per coat. Minimum two coats
CIKOseal RBN-45
(0 Customer review)
$0.00
Rubberised bitumen emulsion for use as protective coating for horizontal and vertical applications on concrete, mortar and cement block masonry surfaces. It provides excellent resistance to soil chemicals. 3.0 m2 per liter per coat. Minimum two coats
CIKOseal SBS Membran
(0 Customer review)
$0.00
Elastomeric bituminous waterproofing membrane obtained from distilled asphalt modified with elastomeric resins (SBS). The membrane is reinforced by non-woven polyester. Both surfaces of the membrane are covered by a plastic film easily torched. 1meter by 10 meters roll.